Made In Great Britain

Direct from our factory

Free Next Day Delivery

On orders over £750

Product Test Results

All test results published

Expert Technical Advice

Call or chat with our team

A 20L metal can of Everflor Asphalt Coat 1K Flexible Asphalt & Tarmac Coating in Black, shown on a clean white background.
EverFlor - UniSeal - Concrete Sealer - Wetlook - Everest Paints

Key Product Features

Flexible Coating

Resists Cracking & Peeling

Algae Resistant

Prevents Moss & Lichen

Brush & Roller

Easy Application

Hot Tyre Ready

No Tyre Pick-up

EverFlor - AsphaltCoat

100% UVA ResistantFlexible CoatingCovers Fine CracksHeavy Duty
A single-pack, water-based acrylic coating for external tarmac, asphalt and tennis court surfaces.

Supplied ready to use with no thinning or mixing, it lays down a smooth matt to low sheen film in seven RAL colours. Slip resistance is measured at PTV 45 to EN 13036-4, and with recoat at 2-4 hours at 20°C a two-coat application can be completed within a single working day.

Agotado
721,00 kr
Configuration
Size
Size: 5 Litre
Colour
Colour: Black (RAL 9005)
Version
Version: Original
Compatible Primer

Delivery & Technical Support

Same Day Dispatch (Order by 11am)

Buy Direct From The Manufacturer

We Deliver To Mainland Europe

Technical Support From Coating Specialists

Our technical team can assist with product selection, surface preparation and application guidance.

Contact Technical Support

Key Product Features

Flexible Coating

Resists Cracking & Peeling

Algae Resistant

Prevents Moss & Lichen

Brush & Roller

Easy Application

Hot Tyre Ready

No Tyre Pick-up

Court and carriageway colour, ready to use straight from the tin

No mixing, no pot life and no thinning — just stir and apply by brush, roller or spray. Low odour and a VOC content below 30 g/l keep solvent emissions off site.

Faded and Unmarked

Painted, Safety Marked

Click an icon to explore features Tap an icon to explore features

Abrasion Resistant Finish

A tough, semi-gloss satin finish engineered to withstand heavy foot traffic and abrasion. Enriched with UV-stable pigments, it maintains rich color depth and resists fading, making it equally effective for internal floors and external patios.

Hydrophobic Vapor Valve

The advanced acrylic lattice acts as a "one-way valve." It blocks rain and surface oils from penetrating downwards but allows trapped ground moisture to escape as vapor—preventing the bubbling and blistering common with standard floor paints.

Active Silane Adhesion

Unlike standard paints that sit on the surface, this formula uses silane promoters to chemically cross-link with the mineral substrate. This creates a permanent, rooted bond that resists flaking and peeling, even under duress.

Optimized Curing Profile

Engineered for efficient application cycles. The coating becomes touch-dry in just 2–4 hours (temperature dependent), preventing debris pickup and allowing for a reliable, streamlined application process on large surface areas.

Performance Profile

Professional grade single-pack water-based acrylic. Matt, smooth finish supplied ready to use, applied by brush, roller or spray at 4-6m² per litre over two coats, with full cure reached in one day.

Download Data Sheet
Coverage 4-6m²per litre, per coat
Touch Dry 2 Hoursat 20°C
Recoat 2-4 Hoursat 20°C, 2 coats recommended
VOC Content < 30 g/llow odour

Essential Information

Product Details

Description

EverFlor AsphaltCoat is a single-pack (1K) water-based acrylic coating formulated for external tarmac and asphalt surfaces. It lays down a matt to low sheen, smooth film that colours and defines large areas of hard standing without the mixing, pot life and solvent handling that come with two-pack systems.

The primary application is tarmac and tennis court surfaces, along with marking out parking bays, pedestrian walkways and hazardous areas. It is also suitable for old asphalt and tarmac, concrete, brick and masonry, so a single product can carry a colour scheme across mixed external substrates.

Seven colours are available: Red Tarmac (RAL 3009), White (RAL 9003), Safety Blue (RAL 5015), Mid Blue (RAL 5010), Black (RAL 9005), Mid Green (RAL 6002) and Safety Yellow (RAL 1023). The safety shades and white are intended for delineation and hazard identification, while Red Tarmac, Mid Green, Mid Blue and Black work as broad court and bay colours.

The product is supplied ready to use, with no thinning required, and can be applied by brush, roller or spray. Coverage is 4-6m² per litre and two coats are recommended. Overcoating is possible after 2-4 hours at 20°C, so a two-coat job can be completed within a single working day, reaching full cure after one day.

Low odour and a VOC content below 30 g/l make it a straightforward choice for sites where solvent emissions and smell are a concern. Available in 5 litre and 20 litre packs with a 12 month shelf life.

Application

SURFACE PREPARATION

AsphaltCoat is intended for old asphalt and tarmac, concrete, brick and masonry. Surfaces must be sound, clean and free of loose material and contamination so the acrylic film can key properly. Set out parking bays, pedestrian walkways and hazardous area markings before you start coating. a primer isn't required on sound substrates, if the surface is dusty, use Prime AQ.


MIXING AND APPLICATION

The product is supplied ready to use and needs no thinning. Stir thoroughly to an even colour, then apply by brush, roller or spray. Coverage is 4-6m² per litre and two coats are recommended for a uniform matt to low sheen finish.


DRYING AND RECOATING

At 20°C the coating is touch dry in 2 hours and can be overcoated after 2-4 hours, allowing a two-coat application to be completed within a single working day. Full cure is reached after one day. Lower temperatures will extend these times.


STORAGE

Shelf life is 12 months. Keep containers closed and protected from frost when not in use.

Available Colours
  •  
    Black (RAL 9005)
  •  
    Red Tarmac (RAL 3009)
  •  
    Mid Green (RAL 6002)
  •  
    White (RAL 9003)
  •  
    Safety Blue (RAL 5015)
  •  
    Safety Yellow (RAL 1023)
  •  
    Mid Blue (RAL 5010)
Coverage Calculator
Technical Data
Finish Matt, Smooth
Coverage 4-6m² per Litre
Recommended coats 2
Touch dry 2 Hours at 20°c
Recoat after 2-4 Hours at 20°c
Full cure 1 Day
Application Brush, Roller or Spray
Cleaner / Thinner Ready to use.
Suitable substrates Old asphalt/tarmac, concrete, brick, masonry
Shelf life 12 months
VOC content < 30 g/l
Test Results

Most paint brands tell you what their product should do. We tell you what it does.

Unlike competitors who hide behind vague marketing terms like 'heavy duty,' we validate our claims with standardized testing. Compare our abrasion rates and adhesion scores—you will see the difference between a standard paint and a professional architectural finish.

Slip resistance

Tested in accordance with EN 13036-4

Result: PTV 45
Rating: Good slip resistance

Not sure what these standards mean? We have compiled a comprehensive guide to help you decode the industry jargon. Click here to explore our testing methodology and learn exactly how to interpret these performance metrics for your project.

Files & Data Sheets

The Knowledge Hub

Everything You Need to Know

Browse our collection of in-depth articles and how-to guides designed to help you get the most out of this product. whether you need help with surface preparation or application advice, we have you covered.

View Technical Hub

A visual comparison of a mossy, weed-infested block paving driveway next to a freshly cleaned section in the UK.
  • por Sam Marriott

Restoring Block Paving: Removing Moss, Weeds, and Lichen

Block paving is the most popular driveway choice in the UK, but it has a major design flaw: Joints. Those thousands of gaps between the bricks are the perfect nursery for weeds, moss, and the dreaded "black spot" lichen. Every...

Leer más

An unbranded industrial floor scrubber being used to maintain the high-gloss shine on a polished concrete warehouse floor.
  • por Sam Marriott

Deep Cleaning Polished Concrete Without Damaging the Shine

Polished concrete is often sold as the "maintenance-free" flooring option. That is a lie. Yes, it is incredibly durable. It won't peel or flake like paint. But if you ignore it, or worse - if you clean it with the...

Leer más

Two unbranded silver tins labeled Acid and Alkaline on an industrial concrete warehouse floor.
  • por Sam Marriott

Acid vs. Alkaline Concrete Cleaners: Which is Best for Your Floor?

If you walk into a hardware store and ask for "concrete cleaner," you'll probably end up with a few different options in-front of you. Most people grab the bottle with the most aggressive warning label, thinking "stronger is better." But...

Leer más

How to Sand a Painted Concrete Floor for Recoating
  • por Sam Marriott

How to Sand a Painted Concrete Floor for Recoating

In our Sanding vs. Grinding: Preparing Previously Painted Concrete guide, we established that if your floor passes the Cross-Hatch Adhesion Test, then the next step for recoating will be sanding. Choosing to sand rather than grind saves you hundreds of pounds in equipment rental and diamond consumables....

Leer más

FAQs

Please read our FAQs page to find out more.

What surfaces can AsphaltCoat be applied to?
It is suitable for old asphalt and tarmac, concrete, brick and masonry. Its primary use is on tarmac and tennis court surfaces, and for marking out parking bays, pedestrian walkways and hazardous areas.
Do I need to thin it or add a hardener?
No. AsphaltCoat is a single-pack (1K) water-based acrylic supplied ready to use, so there is no mixing ratio, no hardener and no thinning required. Stir thoroughly before application.
How many coats are needed and how much will I need?
Two coats are recommended. Coverage is 4-6m² per litre, so a 5 litre pack covers approximately 20-30m² per coat and a 20 litre pack approximately 80-120m² per coat, depending on the porosity and texture of the substrate.
How long before the surface can be used?
The coating is touch dry in 2 hours at 20°C and can be recoated after 2-4 hours at 20°C. Full cure is reached after 1 day, and the surface should be left until then before normal use. Cooler conditions will lengthen these times.
How is it applied, and how do I clean up?
It can be applied by brush, roller or spray. As a water-based product, tools and equipment are cleaned with water immediately after use. It is low odour with a VOC content below 30 g/l.

Didn’t find your answer?

Don't hestitate to contact us